CB – Position indicator
- Material: technopolymer. Maximum temperature 70°
- Colour: Black or orange
- Use: adjustment tool and the direct reading of a displacement (or of an angle) obtained by the rotation of a drive shaft passing through.
- Numerator: 5-digit (four black and a decimal of red) digit height m/m 6.
- Bushing: burnished steel, hole 20 H7. Reducing bushing is available for smaller holes. Max hole for the shaft 22 H7
- Pin: D.6 positioning for assembly.
- Seal: black polyurethane, included.
- Assembly: Place the instrument on the zero then fix the shaft by the screw.
Description
Model: CB – Position indicator
Technical data:
- Material: technopolymer. Maximum temperature 70°
- Colour: Black or orange
- Use: adjustment tool and the direct reading of a displacement (or of an angle) obtained by the rotation of a drive shaft passing through.
- Numerator: 5-digit (four black and a decimal of red) digit height m/m 6.
- Bushing: burnished steel, hole 20 H7. Reducing bushing is available for smaller holes. Max hole for the shaft 22 H7
- Pin: D.6 positioning for assembly.
- Seal: black polyurethane, included.
- Assembly: Place the instrument on the zero then fix the shaft by the screw.
Relationship | Pass | Reading after 1 lap m/m | Maximum speed m/m |
1:05 | 0.5 | 00005 | 500 |
1:10 | 1 | 00010 | 300 |
1:15 | 1,5 | 00015 | 300 |
1:20 | 2 | 00020 | 300 |
1:25 | 2,5 | 00025 | 300 |
1:30 | 3 | 00030 | 300 |
1:40 | 4 | 00040 | 200 |
1:50 | 5 | 00050 | 200 |
1:60 | 6 | 00060 | 200 |
1:100 | 10 | 00100 | 150 |
NOTES:
- Other reports are available on request
- Reduction bushing are available at the standard of 20 mm
Recommended for:
Woodworking machinery
Technical drawings
